Signaling Poles
Tag Mast
Technicial Specifications
-
Height: 6m
-
Range: 10–15 m depending on road condition
-
Coating: Hot dip galvanized
-
Pipe type: Q159x5 mm cylindrical iron pipe
-
Product Code: SN-05-200
Tag poles, which are produced to pass over the asphalt on roads where it is not desired to be cut, are used on roads with 2 or more lanes and heavy traffic.
Tag poles, produced from hot-dip galvanized pipes with a pole diameter of 159 cm and a wall thickness of 5 mm, have a height of 6 meters. Tag poles consist of 2 legs, known as uprights, and 1 beam. Depending on the length of the road, the beams are produced in 2 pieces. In tag poles, the legs are fixed to the ground with anchors.
When determining the width of the tag poles, the length of the road and the distance between the place where the legs will be erected and the road should be known.
Overhead Signaling Pole
Technicial Specifications
-
Protection: Galvanized
-
Pipe type: 139 x 5 mm, 114 x 4 mm, 89 x 4 mm cylindrical iron pipe
-
Standard: TS 301/2, TCK Standards
-
Height: 6 m
-
Product Code: SN-05-600
Overhead signaling pole is a galvanized pole to which traffic lights are connected on urban and suburban signalized roads. Mostly, 200 mm pedestrian signal transmitters, 200 mm auto signal transmitters, 200 mm single signal transmitters are installed at the bottom of the pole, while 300 mm auto signal transmitters are installed at the top.
Poles produced by hot-dip galvanization are resistant to rust. It is manufactured using 139×5 mm, 114×4 mm, 89×4 mm cylindrical iron pipe. Its height is 6 meters. It is produced in accordance with TS 301/2, TCK standards. A cut is made on the pole to make electrical connections and it is covered with a cover. There are 8 M16, 4 M8, 2 M6 inox bolts and 1 side cover on the overhead pole. The upper part of the overhead pole is joined with m16 bolts. For the signal transmitters connected to the upper part, an overhead auto apparatus is used.
The main purpose of overhead poles is to attract and warn the attention of drivers from long distances with the signal transmitter placed on the top. Therefore, signal transmitters with a diameter of 300 mm are used due to their high visibility.
Standard Signaling Pole
Technical specifications
-
Protection: Galvanized
-
Pipe type: 114 x 4 mm cylindrical iron pipe
-
Standard: TS 301/2, TCK Standards
-
Height: 4 m
-
Product Code: SN-05-001
Standard signaling poles are galvanized poles to which the signal transmitters that ensure the intersection layout are connected. Generally, 200 mm triple signal transmitters, 200 mm pedestrian signal transmitters, single signal transmitters and countdown signal transmitters are connected. Depending on the institution's preference, 300 mm 3 group signal transmitters are also used.
It is produced as hot dipped galvanized. This ensures long-lasting use. It is produced in 4 mt. Anchored or recessed type is produced depending on the project. It is manufactured seamlessly from 114×4 mm cylindrical industrial iron pipe. It is produced in accordance with highway standards. A cover is used on the top of standard poles to prevent water from entering. There are 20×10 cm oval corner connection points for electrical connections. These points are closed with a gasketed lid to ensure sealing. There are 21 pieces of 6 TSEK certified rail terminal blocks on the staggered rail inside the cover.
After all the hot-dip galvanized cutting, welding and deburring processes, the product goes. This eliminates the possibility of rusting of poles used outdoors.
