Complementary Products
Flashing Device
Technical specifications
-
Operating Voltage: 220V
-
Product Type: In-module / Pole-mounted
-
Purpose of use: Taking flash position
-
Product Code: SN-15-020
If the signal transmitters are not connected to the control mechanism, they will constantly burn when energized. With the flashing device you can add to it to flash for warning purposes, it can be made to flash continuously without being connected to the controller.
You can use the flash device either on the pole or inside the signal transmitter.
Green Wave Satellite Module (GPS)
Technical specifications
-
Synchronization: GPS
-
Compatible Device: Maestro, Master
-
Intended Use: Green Wave System
-
Product Code: SN-15-010
The green wave satellite module, also known as the GPS (Global Positioning System) module, which is compatible with Maestro and Master intersection control devices, creates a system where drivers can work synchronously between intersections and ensure green light balance on the roads, provided that they comply with certain rules in traffic flow.
Thanks to the Green Wave, whose signs we have started to see on many roads in the city, many intersection control devices are connected with each other and each control device works in a coordinated manner by turning on the green light at a certain time. It ensures that the clocks are the same for each controller with the signals it receives from satellite frequencies. And all you have to do is calculate the times when the green light will turn on, based on speed and road length, and enter it into the program. When traveling at the specified speed, the vehicle will not catch a red light along the road.
It is applied in places where traffic is concentrated on urban main lines and in parts where vehicles flow intensively in one direction. It has many benefits. The number of stops and starts is reduced and it prevents drivers from becoming angry in traffic. Since this synchronization will be achieved at a certain speed, speed control of the drivers will be ensured and overspeeding will be prevented.
Led Pedestrian Paving Stone
Technical specifications
-
Dimension: 300 x 200 x 35 mm
-
Weight: 2.4kg
-
Body Material: Polycarbonate
-
LED: Red,Green LED STRIP
-
Operating Voltage: 24 V DC
-
Protection: With casting resin
-
Assembly: Drilling holes on the pavement, placing it in the slot and sticking it with adhesive.
-
Product Code: SN-15-050
LED pedestrian paving stones are produced to warn people more effectively at intersections with pedestrian crossings. With this product, pedestrians will be able to monitor whether it is their turn to cross without looking at the signal transmitters.
As a result of habit, pedestrians generally do not pay attention to the lights. This leads to accidents with injuries or deaths. At this point, new ideas have begun to emerge to attract the attention of pedestrians. LED pedestrian paving stone is one of these applications. With these stones, pedestrians can see which light is on for them on the ground.
The paving stones, which measure 300 x 200 x 35 mm and weigh 2400 g, do not appear to break or wear out when stepped on, due to their durable structure. Red and green strip LEDs are used. It works with 24 v DC and provides color transitions in synchronization with pedestrian signal transmitters. It is produced using polycarbonate material.
The mounting method is by drilling holes on the pavement, placing it in the slot and fixing it to the ground with adhesive material. The product, which we are sure will spread rapidly over time, will make a difference as a complementary product that will make intersections look colorful and beautiful with its visual elegance.
